FTD Dentifix-3D Modelling HR 3D Printing Resin


3D Printing resin Fun To Do Dentifix-3D High Reactivity. A new resin for dental models by FunToDo. Compatible with main DLP and LCD 3D printers. 2 colors available: light grey and yellow sand.



A resin born from the collaboration of Fun To Do with professionals  from the dental field.

The resin has a very smooth surface after printing and a great hardness that makes it ideal for dental models creation.

Its matt yellow sand color makes details clear and facilitates laboratory work by eliminating annoying reflexes. Also available in matt grey.

This HR resin, High reactivity,  is compatible with main  DLP and LCD 3D printers.

3D printing resin Fun To Do Dentifix-3D Modelling HR features


 Package  1kg
 Applications  Dental models
 Color  Opaque, Sand Yellow RAL 1002 / Grey
 Viscosity       at 25°C  95 mPa.s
 Hardness (Shore D)  81
 Exposure Energy  18 mJ/cm2
 Max. cure depth  0.085
 Resolution  0.02-0.085 mm
 Tensile strenght  45 Mpa
 Elongation at break  5%
 Shrinkage  <0.2%

Although the properties in this table are accurate, Dentifix-3D can’t make any warranty, expressed or implied regarding the accuracy of the properties obtained by the use of this product.

Product properties can change without any prior notice.

Finishing Instructions

  1. To clean and remove excess resin, agitate the 3D printed part in an ulkltrasonic cleaner with TEK1969 cleaning or in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.

  2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

  3. Clean off any excess of liquid with a cold blowdryer or compressed air.

  4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

Additional information

Weight 1.5 kg
Dimensions 10 × 10 × 30 cm



There are no reviews yet.

Be the first to review “FTD Dentifix-3D Modelling HR 3D Printing Resin”

Your email address will not be published. Required fields are marked *