Harz Labs Industrial Nylon-like 3D Printing Resin

Description

3D printing resin Harz Labs Industrial Nylon-like allows you to print various engineering products, such as impact-resistant housings, gears. Due to the high impact strength and large elongation at break, this material allows you to print functional products. Printed models can be used as functional prototypes and final products. It is not recommended to use the products in contact with water and in aggressive environments, such as acids, alkalis and their solutions, as well as in contact with solvents.

 

Russian certification. Product without european certification, to be used only for models.

COMPATIBLE WITH MAIN DLP/LCD 3D PRINTERS

 

3D printing settings on most widespread 3D printers

click here

 

3D printing resin Harz Labs Industrial Nylon-like characteristics

 

Appearance		Colored liquid
Color		Pale Yellow
Elongation at break		115.0 ± 15.5 %
Hardness (Shore D)		75 ± 5
Odor		Weak
Tensile modulus of elasticity		280 ± 30 MPa
Tensile strength		25 ± 6.5 MPa
Viscosity (Brookfield)	at 25°C	850 ± 250 mPa*s

 

Advantages

 

• FLEXIBLE

  Flexible material that allows you to print resilient and durable models.

• ODORLESS

  Resins are odorless and cause no irritation, so you can work with natural ventilation.

• LOW SHRINKAGE

  Shrinkage less than 0.5% gives you the same size of the 3D model on your computer.

• SAFE

  Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home. 

• STABLE

  Resin is very stable. You can leave it for long time in the vat, no sedimentation and gel formation occur – no need to mix.

Finishing Instructions

 

1. To clean and remove excess resin, flash the 3D printed part for 30 seconds, several times until excess resin is removed, in an ultrasonic cleaner with TEK1960* .

2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

3. Clean off any excess of liquid with a cold blowdryer or compressed air.

4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

 

Safety notice

 

The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.

 

                      MSDS