Harz Labs Dental Model Beige / Bone 3D Printing Resin

64.80108.00

Dental Model resin is matt colored resin made of biocompatible raw materials that used in UV-cured dental fillings. It has high hardness 84 ± 2 Shore D and high tensile strength, stability to mechanical and thermal stress. We recommend to use it for demonstrational and master-model printing. Low odor and absence of harmful monomers allows to print in the laboratory.

Clear

Description

HARZ Labs Dental Model Beige / Bone 3D Printing Resin

Designed for dental models. Tough, hard, stable to high temperatures during thermoforming aligners and it has low shrinkage.

Dental Model resin is matt colored resin made of biocompatible raw materials that used in UV-cured dental fillings. It has high hardness 84 ± 2 Shore D and high tensile strength, stability to mechanical and thermal stress. We recommend to use it for demonstrational and master-model printing. Low odor and absence of harmful monomers allows to print in the laboratory.

Russian certification. Product without European certification, to be used only for models.

COMPATIBLE WITH MAIN DLP/LCD 3D PRINTERS

For more info write to us at: info@3dsolutions.store.

 

3D printing settings on most widespread 3D printers

click here

 

3D printing resin Harz Labs Dental Model Beige / Bone characteristics

 Package                1 kg / 0.5 kg
 Applications   demonstrational
and master-model printing
 Color   Beige, Bone
 Viscosity (Brookfield)       at 25°C     900 ± 300 Pa*s
 Hardness (Shore D)    97-90>
 Tensile strength   60 ± 2.0 N/mm2
 Elongation at break   11.0 ± 1.0 %
 Shrinkage   <0.3%

Advantages

  • UNIQUE MECHANICAL PROPERTIES

    Very high hardness, tensile strength, abrasion and scratch resistance due to ceramic fillers.

  • LOW VISCOSITY

    The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time.

  • CHEMICAL RESISTANCE

    Resin is stable to solvents, aggressive inorganic agents like acid and alkalis.

  • ODORLESS

    Resins are odorless and cause no irritation, so you can work with natural ventilation.

  • LOW SHRINKAGE

    Shrinkage less than 0.5% gives you the same size of the 3D model on your computer

  • BIOCOMPATIBLE

    Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standards ISO 10993. 

  • DURABLE

    Pigments and fillers are well stabilized, no sedimentation and flocculation occur and no foam appears

Finishing Instructions

  1. Agitate in a vat with TEK1960* solvent for 1-2 minutes to remove excess resin.

  2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

  3. Clean off any excess of liquid with a cold blowdryer or compressed air.

  4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

Safety notice

The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.

 

 More Information                     MSDS

Additional information

Weight 1.5 kg
Dimensions 10 × 10 × 30 cm
SIZE

1 KG, 0,5 KG

COLOR

BEIGE, BONE

Reviews

There are no reviews yet.

Be the first to review “Harz Labs Dental Model Beige / Bone 3D Printing Resin”

Your email address will not be published. Required fields are marked *

Slide to unlock *

This site uses Akismet to reduce spam. Learn how your comment data is processed.