Description
Designed for dental demonstration models of gingiva with yellowish pink color, this 3D printing resin is tough, glossy and stable to deformations.
Dental Pink resin is PMMA-like resin, made of biocompatible raw materials, with gum semitransparent color. It has high hardness 87 Shore D and high tensile strength, stable to mechanical stress.
Recommended for printing of dental model of gum color such as Gingiva mask. Low odor and absence of harmful monomers allows to print in the laboratory, with no need for special equipment.
Russian certification. Product without European certification, to be used only for models.
COMPATIBLE WITH MAIN DLP/LCD 3D PRINTERS
Harz labs Dental Peach 3D printing resin in the version for SLA 3D printers, such as Form1 / 2 and Peopoly, is available upon request. Write to us at: info@3dsolutions.store.
3D printing settings on most widespread 3D printers
3D printing resin Harz Labs Dental Pink characteristics
–
Package | 1kg/0.5kg | |
Applications | dental demonstration models of gingiva | |
Color | semitrasparent pink | |
Viscosity (Brookfield) | at 25°C | 1-1.2 Pa.s |
Hardness (Shore D) | 97-90> | |
Tensile strenght | 60 N/mm2 | |
Elongation at break | 3-4 % | |
Shrinkage | <0.5% |
Advantages
-
UNIQUE MECHANICAL PROPERTIES
Very high hardness, tensile strength, abrasion and scratch resistance due to ceramic fillers.
-
LOW VISCOSITY
The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time.
-
CHEMICAL RESISTANCE
Resin is stable to solvents, aggressive inorganic agents like acid and alkalis.
-
ODORLESS
Resins are odorless and cause no irritation, so you can work with natural ventilation.
-
LOW SHRINKAGE
Shrinkage less than 0.5% gives you the same size of the 3D model on your computer
-
BIOCOMPATIBLE
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standards ISO 10993.
-
DURABLE
Pigments and fillers are well stabilized, no sedimentation and flocculation occur and no foam appears
Finishing Instructions
-
Agitate in a bath with TEK1960* solvent for 1-2 minutes to remove excess resin.
-
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
-
Clean off any excess of liquid with a cold blowdryer or compressed air.
-
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
Safety notice
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.
Reviews
There are no reviews yet.