Dental RO is an X-ray contrast polymer designed for printing CT patterns to facilitate subsequent alignment of the scanned jaw and CT scan.
Dental RO Photopolymer contains a special radiopaque filler for obtaining a clear picture when conducting a CT scan. The material of this resin for 3D printing are made in white from biocompatible raw materials, durable and accurate.
Thanks to this resin for 3D printing, when CT is removed, the edge of the model is sharp, without graininess, which makes it easy to compare the results of a computer tomogram and a simulated model to obtain the exact location of the roots of the teeth and the exact planning of the operation.
Russian certification. Product without European certification, to be used only for models.
COMPATIBLE WITH MAIN DLP/LCD 3D PRINTERS
3D printing settings on most widespread 3D printers
3D printing resin Harz Labs Dental RO characteristics
|Applications||CT patterns for scanned jaw and CT scan alignment|
|Color||White, opaque liquid|
|Viscosity (Brookfield)||at 25°C||1.1-1.5 Pa*s|
|Hardness (Shore D)||75|
|Tensile strenght||30 MPa|
|Elongation at break||2-4%|
Agitate in a vat with TEK1960* solvent for 1-2 minutes to remove excess resin.
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
Clean off any excess of liquid with a cold blowdryer or compressed air.
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.