TEK 1960 solvent for stereolithography 3D printing
Solvent 3D cleaning liquid for post-processing of 3D printers resins.
Stronger than TEK1969 3D cleaning liquid, less aggressive than IPA.
Methods of Use:
Magnetic or manual agitator (preferred method)
Manual immersion in a container (glass or polyethylene) and shake until uncured resin has dissolved.
How to use it in manual or magnetic agitator:
Put the liquid in the agitator container
Operate the agitator about 1 minute before cleaning
Insert the printed parts for at least 5 minutes into the agitator
Remove the parts from the agitator and wash with cleaned water
Blow the object with compressed air.
Proceed with UV curing of the printed objects
TEK 1960 has evaporation rate similar to water.
1 litre pack
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.
There are no reviews yet.