Resine-3D NanoPrint Thermoplast: high strength shape-memory resin

Description

NanoPrint Thermoplast 3D Resin – TPO Free – Made in France 

Introducing NanoPrint Thermoplast (Shape-memory): the resin that takes 3D printing to a whole new level with its unique thermoplastic behavior.

This smart material isn’t your ordinary resin – it’s designed with shape-memory characteristics, making it truly innovative. With NanoPrint Thermoplast, you get the best of both worlds: a hard and tough resin with substantial strength, combined with the flexibility to reshape it with heat.

When subjected to heat, NanoPrint Thermoplast exhibits remarkable flexibility, allowing you to easily shape it to your desired form. Once cooled, it retains its newly shaped structure and regains its high strength without deforming. But here’s where it gets truly fascinating: if heated again, it automatically reverts to its exact original shape, thanks to its shape-memory properties.

Precision is key with NanoPrint Thermoplast. With high accuracy and minimal shrinkage, you can trust that your prints will come out exactly as intended, every time.

Available in both clear and black colors, NanoPrint Thermoplast offers versatility without compromise, allowing you to bring your creative visions to life.

For a complete understanding of the resin’s characteristics, please refer to the Technical Data Sheet (TDS). Elevate your 3D printing experience with NanoPrint Thermoplast – the resin that defies expectations.

3D printing resin Resine-3D NanoPrint Thermoplast characteristics

 

Package		1kg
Applications		Innovative applications requiring hardness and flexibility
Color		Clear (transparent), Black
Odor		Faint Odor
Viscosity	at 25°C	410 mPa.s at 25°C
Hardness (Shore D)		85
Elongation at break		10%
Tensile Strength		79 MPa
Flexural Modulus		1790 MPa
Flexural Strength		92 MPa
Tg		69 °C
HDT at 0.45 MPa		65 °C
Storage		10°C< t >40°C, in dark, dry place out of direct sunlight
Wash up		40-60% ethyl alcohol, isopropyl alcohol

Although the properties in this table are accurate, Resine-3D can’t make any warranty, expressed or implied regarding the accuracy of the properties obtained by the use of this product.

Product properties can change without any prior notice.

Finishing Instructions

1. To clean and remove excess resin, agitate the 3D printed part in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.

2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

3. Clean off any excess of liquid with a cold blowdryer or compressed air.

4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

Safety notice

The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.

 

MSDS