Dentifix-3D Gingiva Mask FLEX Printing Resin


3D Printing resin FunToDo Dentifix Gingiva High Reactivity. A new resin for flexible parts of dental models by FunToDo. Compatible with DLP/LCD 3D printers. Pink color.

FunToDo resins are available in 1KG and 0.5KG containers, the SAMPLE 0.25KG version has been replaced by the 0.5kg version.

This resin is out of stock, as replacement it is recommended these two resins:

Harz Labs Dental Pink 3D Printing Resin




A resin born from the collaboration of FunToDo with dental institutes and professionals from the dental field.

Dentifix-3D Gingiva is a strong and flexible 3D printing resin, gum pink color, suitable for printing flexible gingival masks.

It can be used in combination with dental model elements with 3D printed with Dentifix-3D resin to test dental implants in the jaw model, simulating the flexibility of the patient’s gums to adjust dental prostheses.

This HR resin, High reactivity, is compatible with DLP and  LCD 3D printers.

3D printing resin FunToDo Dentifix Gingiva HR characteristics


 Package  1kg
 Applications  Flexible gingiva masks
 Color  Pink, RAL 3014
 Hardness (Shore A)  60-65

Although the properties in this table are accurate, Dentifix-3D can’t make any warranty, expressed or implied regarding the accuracy of the properties obtained by the use of this product.

Product properties can change without any prior notice.


Finishing Instructions

  1. To clean and remove excess resin, agitate the 3D printed part in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.

  2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

  3. Clean off any excess of liquid with a cold blowdryer or compressed air.

  4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

Safety notice

The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.


FunToDo resins are available in 1KG and 0.5KG containers, the SAMPLE 0.25KG version has been replaced by the 0.5kg version.

Additional information

Weight 1.5 kg
Dimensions 10 × 10 × 30 cm

SAMPLE 0.25KG, 1 KG, 0.5 KG


There are no reviews yet.

Be the first to review “Dentifix-3D Gingiva Mask FLEX Printing Resin”

Your email address will not be published. Required fields are marked *

Slide to unlock *

This site uses Akismet to reduce spam. Learn how your comment data is processed.