FTD Dentifix 3D Modeling HR Resin
A resin born from the collaboration of FunToDo with professionals from the dental field.
The FTD Dentifix 3D Modeling HR Resin has a very smooth surface after printing and a great hardness that makes it ideal for dental models creation.
Its matte yellow sand color (RAL 1002 opaque) makes details clear and facilitates laboratory work by eliminating annoying reflexes. Also available in matte grey (opaque) and Clear (transparent)
This HR resin, High reactivity, is compatible with main DLP and LCD 3D printers.
FTD Dentifix 3D Modeling HR Resin Features
|Color||Opaque, Sand Yellow RAL 1002 / Grey /Clear|
|Viscosity||at 25°C||95 mPa.s|
|Hardness (Shore D)||81|
|Exposure Energy||18 mJ/cm2|
|Max. cure depth||0.085|
|Tensile strenght||45 Mpa|
|Elongation at break||5%|
Although the properties in this table are accurate, Dentifix-3D can’t make any warranty, expressed or implied regarding the accuracy of the properties obtained by the use of this product.
Product properties can change without any prior notice.
To clean and remove excess resin, agitate the 3D printed part in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
Clean off any excess of liquid with a cold blowdryer or compressed air.
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.