3D Printing resin Harz Labs Model for Glowing 3D models.
A feature of this polymer is the use of a special glowing pigment, which ensures a bright green glow in the dark resin for up to 2 hours.
Russian certification. Product without european certification, to be used only for models.
COMPATIBLE WITH MAIN DLP/LCD 3D PRINTERS
3D printing settings on most widespread 3D printers
3D printing resin Harz Labs ART Glow characteristics
|Applications||Glowing 3D models|
|Hardness (Shore D)||90-92|
|Luminescence||up to 2 h|
GLOW IN THE DARK RESIN
Art Glow Resin keeps a luminescence up to 2 hours after fully “charging”.
Resin does not contain solvents, volatile monomers or irritating compounds. No fumes, odor and allergic reaction.
Shrinkage less than 0,5 % gives you the same size like 3D model on your computer.
Resins are odorless and cause no irritation, so you can work with natural ventilation.
The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time.
Agitate in a vat with TEK1960* solvent for 1-2 minutes to remove excess resin.
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
Clean off any excess of liquid with a cold blowdryer or compressed air.
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.