Description
Harz Labs Industrial ABS, 3D printing resin designed for creating mechanical parts and end models.
Polyurethane-based material, when fully cured has similar mechanical properties to ABS moulded parts – high hardness and toughness. Chemical properties are close to polyurethane and strong as moulded ABS.
Due to chemical composition, it is a safe material suitable for printing functional end parts such as body parts, cases, functional prototypes etc. Accurate, non-brittle and odourless resin for your manufacturing needs
Russian certification. Product without european certification, to be used only for models.
COMPATIBLE WITH MAIN DLP/LCD 3D PRINTERS
3D printing settings on most widespread 3D printers
3D printing resin Harz Labs Industrial ABS characteristics
Package | 1kg/0.5kg | |
Applications | mechanical and final parts | |
Color | black | |
Viscosity (Brookfield) | at 20°C | 0.5-0.8 Pa.s |
Hardness (Shore D) | 84 | |
Tensile strength | 48 N/mm2 | |
Elongation at break | 10% | |
Shrinkage | <0.5% |
Advantages
-
UNIQUE MECHANICAL PROPERTIES
Very high hardness, tensile strength.
-
ODORLESS
Resins are odorless and cause no irritation, so you can work with natural ventilation.
-
LOW SHRINKAGE
Shrinkage less than 0.5% gives you the same size of the 3D model on your computer
- SAFETYIt does not contain solvents or volatile monomers, nor irritating compounds. Absence of fumes, odors or allergic reactions.
Finishing Instructions
-
Agitate in a vat with TEK1960* solvent for 1-2 minutes to remove excess resin.
-
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
-
Clean off any excess of liquid with a cold blowdryer or compressed air.
-
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
Safety notice
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.
Reviews
There are no reviews yet.