LumiReact Hard & Strong is a line of resin suitable for parts requiring a certain hardness.
LumiReact resin allow to enhance details accuracy, have a very low shrinkage value and are working both on DLP or UV laser printers with a spectrum between 225nm to 415nm.
They are water-resistant and once solidified they keep intact their characteristics and forms at temperatures between -40 ° and + 220 °.
Contact us to confirm if they are compatible with your printer.
Available in grey, blue teal, orange and in the NEW NATURAL TONE color.
3D printing resin LumiReact HS characteristics
|Color||opaque: natural. teal, orange, grey|
|Viscosity||at 25°C||95 mPa.s|
|Hardness (Shore D)||75|
To clean and remove excess resin, agitate the 3D printed part in a simple vat with TEK1960 solvent for 1-2 minutes.
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
Clean off any excess of liquid with a cold blowdryer or compressed air.
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
LumiReact HS natural
LumiReact HS Ottanio
LumiReact HS Arancione
LumiReact HS Grigio
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.