Description
Dentifix-3D Dental 3D Resin Modelling Low – TPO Free only for the clear color – Made in France
Dentifix was created following close collaboration with dentistry professionals and dental prosthetists, becoming the most affordable dental resin on the market! This resin is perfect for printing dental models, alignments, retainers, crowns, bridges, etc. It can also be used for all other applications requiring a high precision of the model.
Dentifix-3D Modelling has a very smooth surface after printing and great hardness, making it ideal for dental model creation. Its matte color makes details clear and facilitates laboratory work by eliminating annoying reflections. Use it with Dentifix Gingiva Mask FLEX resin to simulate the flexibility of the patient’s gums and adjust dental prostheses.
3D Printing Resin Dentifix-3D Dental 3D Resin Modeling Low Characteristics
Exposure energy
| Package | 1 kg | |
| Applications | Dental models (alignments, retainers, crowns, bridges, etc) | |
| Color | Sand Yellow RAL 1002 (opaque), Matte Grey (opaque) or Clear (transparent) | |
| Odor | Faint Odor | |
| Viscosity | at 25°C | 95 mPa.s |
| Hardness (Shore D) | 81 | |
| Density | 1.05 g/cm³ | |
| Exposure energy | 18 mJ/cm² | |
| Tensile strength | 45 MPa | |
| Elongation at break | 5% | |
| Shrinkage | <0.2% | |
| Z-axis resolution (layer height) | from 10 to 150 μm | |
| UV cure | from 225 to 415 nm | |
| Storage | 10°C< t >40°C, in dark, dry place out of direct sunlight | |
| Wash up | 40-60% ethyl alcohol, isopropyl alcohol |
Although the properties in this table are accurate, Dentifix-3D can’t make any warranty, expressed or implied regarding the accuracy of the properties obtained by the use of this product.
Product properties can change without any prior notice.
Finishing Instructions
-
To clean and remove excess resin, agitate the 3D printed part in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.
-
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
-
Clean off any excess of liquid with a cold blowdryer or compressed air.
-
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
Safety notice
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.
Reviews
There are no reviews yet.