Dentifix-3D Dental 3D Resin Ortho Model – Cream

Description

Dentifix-3D Dental 3D Resin Ortho Model – TPO Free – Made in France

Introducing Dentifix-3D Ortho Model Cream Resin, your premier choice for precision dental modeling in aligner thermoforming applications.

Crafted with a specialized formula, Dentifix-3D Ortho Model Cream Resin is meticulously engineered to meet the exacting demands of dental professionals. Tailored specifically for printing dental models, it ensures unparalleled accuracy with minimal shrinkage, guaranteeing precise results every time.

With its exceptional strength and modulus, this resin is designed to withstand the rigorous thermoforming pressure, ensuring durability and reliability throughout the process. Its superior thermal stability at elevated temperatures eliminates any risk of deflection during thermoforming, providing peace of mind and consistent outcomes.

Available in a sophisticated cream color, Dentifix-3D Ortho Model Cream Resin delivers high-resolution details, capturing even the most intricate aspects of dental models with clarity and precision. Elevate your dental practice with Dentifix-3D Ortho Model Cream Resin — the ultimate solution for superior aligner thermoforming results.

3D Printing Resin Dentifix-3D Dental 3D Resin Ortho Model Characteristics

 

Package		1 kg
Applications		Aligner thermoforming
Color		Cream
Odor		Faint Odor
Viscosity	at 25°C	280 mPas
Hardness (Shore D)		80
Tensile strength		44 MPa
Elongation at break		4%
Flexural Modulus		2330 MPa
Flexural Strength		121 MPa
UV cure		from 225 to 415 nm
Tg		132 °C
HDT at 0.45 MPa		131 °C
Storage		10°C< t >40°C, in dark, dry place out of direct sunlight
Wash up		40-60% ethyl alcohol, isopropyl alcohol

 

Although the properties in this table are accurate, Dentifix-3D can’t make any warranty, expressed or implied regarding the accuracy of the properties obtained by the use of this product.

Product properties can change without any prior notice.

Finishing Instructions

1. To clean and remove excess resin, agitate the 3D printed part in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.

2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

3. Clean off any excess of liquid with a cold blowdryer or compressed air.

4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

Safety notice

The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.

 

MSDS