Harz Labs J-Cast 3D Printing Resin

110.00180.00

HARZ Labs J-Cast resin is excellent for direct casting of a variety of metals. Nearly zero ash content (less than 0.03%) and thermoplastic properties make the resin suitable for direct casting. Differenties of this resin is the ability to use it with gypsum molds and burn out in wax mode, which can significantly reduce the cost of manufacturing products.

Clear

Description

HARZ Labs J-Cast resin is excellent for direct casting of a variety of metals. Nearly zero ash content (less than 0.03%) and thermoplastic properties make the resin suitable for direct casting. Differenties of this resin is the ability to use it with gypsum molds and burn out in wax mode, which can significantly reduce the cost of manufacturing products.

 

COMPATIBLE WITH MAIN DLP/LCD 3D PRINTERS

 

3D printing settings on most widespread 3D printers

Click here

 

Harz Labs 3D printing resin J-cast characteristics

 

 Package                1kg / 0.5kg
 Applications   direct casting of a variety of metals
 Color   transparent blue
 Viscosity (Brookfield)       at 20°C     0.5-0.8 Pa.s
Shrinkage   <1%
Ash content   <0.03%
     
     

Advantages

 

Accurate
Very precise resin, able to print dental models where exact size and fitting is a must
Odorless
Resins are odorless and cause no irritation, so you can work with natural ventilation without special technique
Low shrinkage
Shrinkage less than 1% gives you the same size like 3D model on your computer
Zero ash content
Close to zero ash content (<0. 03 %) and high strength makes it possible to cast precise metal and  ceramic products
Stable
Resin is very stable, you can leave it for a long time in the vat, no sedimentation and gel formation occur
no need to mix
Easy to cast
Thermoplastic behavior of the resin provides melting in wide temperature window (250
300 C) to give very smooth surface of casted models

 

Finishing Instructions

  1. Agitate in ultrasonic bath with TEK1969 Detergent or in a vat with TEK1960* solvent for 1-2 minutes to remove excess resin.

  2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

  3. Clean off any excess of liquid with a cold blowdryer or compressed air.

  4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

 

More Information                     MSDS

 

Additional information

Weight 1.5 kg
Dimensions 10 × 10 × 30 cm
SIZE

1 KG, 0,5 KG

Reviews

There are no reviews yet.

Be the first to review “Harz Labs J-Cast 3D Printing Resin”

Your email address will not be published. Required fields are marked *