Descrizione
FunToDo Nano Clear 3D Resin – Made in France
Enormous high resolution (up to 2 microns), and clarity. There are numerous applications where an Ultra High resolution clear resin is needed. High Tech applications involving micro fluids, light channeling, micro lighting, microscopic filter applications etc. Although Nano Clear is especially a product targeting the high end market, also the other end of the printer spectrum can benefit from this high resolution resin. Although the mechanical and optical limitations of common LCD machines, like the D7 and the Photon, won’t bring out the best of this resin, these machines can also benefit from the magnificent properties of Nano Clear.
3D printing resin FunToDo Nano Clear characteristics
| Package | 1kg | |
| Applications | Micro fluids, light channelling, micro lighting, etc. | |
| Color | Clear (transparent) | |
| Odor | Faint Odor | |
| Viscosity | at 25°C | 83 mPa.s at 25°C |
| Hardness (Shore D) | 85 | |
| Density | 1.02 g/cm³ | |
| Shrinkage | <0.2% | |
| Z-axis resolution (layer height) | from 5 to 100 μm | |
| UV cure | from 225 to 415 nm | |
| Storage | 10°C< t >40°C, in dark, dry place out of direct sunlight | |
| Wash up | 40-60% ethyl alcohol, isopropyl alcohol |
Although the properties in this table are accurate, Resine-3D can’t make any warranty, expressed or implied regarding the accuracy of the properties obtained by the use of this product.
Product properties can change without any prior notice.
Finishing Instructions
-
To clean and remove excess resin, agitate the 3D printed part in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.
-
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
-
Clean off any excess of liquid with a cold blowdryer or compressed air.
-
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
Safety notice
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.
Recensioni
Ancora non ci sono recensioni.