A resin born from the collaboration of FunToDo with dental institutes and professionals from the dental field.
Dentifix-3D Gingiva is a strong and flexible 3D printing resin, gum pink color, suitable for printing flexible gingival masks.
It can be used in combination with dental model elements with 3D printed with Dentifix-3D resin to test dental implants in the jaw model, simulating the flexibility of the patient’s gums to adjust dental prostheses.
This HR resin, High reactivity, is compatible with DLP and LCD 3D printers.
3D printing resin FunToDo Dentifix Gingiva HR characteristics
|Applications||Flexible gingiva masks|
|Color||Pink, RAL 3014|
|Hardness (Shore A)||60-65|
Although the properties in this table are accurate, Dentifix-3D can’t make any warranty, expressed or implied regarding the accuracy of the properties obtained by the use of this product.
Product properties can change without any prior notice.
To clean and remove excess resin, agitate the 3D printed part in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
Clean off any excess of liquid with a cold blowdryer or compressed air.
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.
There are no reviews yet.