F1+ (Grey) Printing resin

F1+ Blend is the blend especially made for SLA 3D printers, such as Formlabs. The F1+ is also compatible with Formlabs PreForm software. Simply choose the appropriate color and parameter V02. Then, compose the height of the layer. Due to the very high detail of the blend, especially the black version, amazing detail results are achievable at a layer height of 0.05 and 0.02 mm.

F1 + blends are compatible with our pigments. Depending on the pigments added, you may need to choose a different color setting in the PreForm software: lighter colors require lighter color settings in the software.

Characteristics:

• Package: 1 kg
• Color: Clear (transparent), White, Gray or Black (opaque)
• Odor: Faint odor
• Viscosity: 95 mPa.s at 25°C
• Hardness Shore D: 80
• Density: 1.02 g/cm³
• Shrinkage: <0.5%
• Z-axis resolution (layer height): from 20 to 200 μm
• UV cure: from 225 to 415 nm
• Storage: 10°C< t >40°C, in dark, dry place out of direct sunlight
• Wash up: 40-60% ethyl alcohol, isopropyl alcohol or TEK1960

What does the box contain?
Resin FunToDo F1+ NXT GEN (1 kg)