FunToDo latest blend, a Ultra High Resolution Clear resin: NANO CLEAR
Enormous high resolution, and clarity. There are numerous applications where a Ultra High resolution clear 3D printing resin is needed. High Teck applications involving micro fluids, light channelling, micro lighting, microscopic filter applications etc,
Today’s High End printers equipped with high precision mechanics and high and optical Light engines are capable of so much higher resolutions than the current available resins can provide them.
Although Nano Clear is especially a product targeting the high end market, also the other end of the printer spectrum can benefit from this high resolution resin.
Although the mechanical and optical limitations of common LCD machines, like the D7 and the Photon, won’t bring out the best of this resin, these machines can also benefit from the magnificent properties of Nano Clear.
3D printing resin FunToDo Nano Clear characteristics
|Viscosity||at 25°C||80-85 mPa.s|
|Hardness (Shore D)||83-85|
3D printing resin finishing Instructions
To clean and remove excess resin, agitate the 3D printed part in a bath with TEK1960 solvent for 1-2 minutes.
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
Clean off any excess of liquid with a cold blowdryer or compressed air.
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
More information is available at FunToDo.
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.
There are no reviews yet.