Description
3D printing resin Harz Labs Dental IBT due to flexible characteristics and non-stick formula, you can reduce the time of the orthodontic bracket setting process and increase patient comfort. The printed models are tasteless and odorless. The material is transparent, allowing effective curing of composites with Dental LED curing lights. A slight odor and the absence of harmful monomers allow you to work even in a small room. Meets the requirements of ISO 10993.
Russian certification. Product without european certification, to be used only for models.
COMPATIBLE WITH MAIN DLP/LCD 3D PRINTERS
3D printing settings on most widespread 3D printers
3D printing resin Harz Labs Dental IBT characteristics
Color | Clear | |
Elongation at break | 120 ± 20 % | |
Hardness (Shore D) | 75 ± 5 | |
Odor | Weak odor | |
Tensile modulus of elasticity | 250.0 ± 35.0 MPa | |
Viscosity (Brookfield) | at 25°C | 550 ± 150 mPa*s |
Advantages
-
ACCURATE
Provides high precision printing.
-
FLEXIBLE
Optimal properties provide easy fixation and its removal.
-
SAFE
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home.
-
BIOCOMPATIBLE
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993.
Finishing Instructions
-
To clean and remove excess resin, flash the 3D printed part for 30 seconds, several times until excess resin is removed, in an ultrasonic cleaner with TEK1960* .
-
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
-
Clean off any excess of liquid with a cold blowdryer or compressed air.
-
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
Safety notice
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.
Reviews
There are no reviews yet.