Harz Labs Dental Model Beige / Bone 3D Printing Resin


Designed for printing dental models. Durable, hard, and resistant to high temperature during clear aligners thermoforming. Meets the requirements of ISO 10993.



3D printing resin Harz Labs Dental Model is made from biocompatible raw materials. It has a matte surface, high durability and tensile strength. Available colors: Peach (available for Form2), Beige, Bone. The slight odor and lack of hazardous monomers allow for performing printing even in a small laboratory. We recommend to use it for demonstrational and master-model printing.


Russian certification. Product without European certification, to be used only for models.



3D printing settings on most widespread 3D printers

click here


3D printing resin Harz Labs Dental Model Beige / Bone characteristics


 Appearance   Opaque liquid
 Color   Beige, Bone
 Odor   Weak odor
 Viscosity (Brookfield)       at 25°C     1000 ± 200 mPа∙с (Beige), 900 ± 300 мPа∙с (Bone)
 Hardness (Shore D)   84.0 ± 2.0
 Tensile strength   80.0 ± 10 MPa (Bone)
 Elongation at break   11 ± 1 %
 Shrinkage   <0.3%




  • SAFE

    Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home.


    Provides high precision printing.


    Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears.


    Shrinkage less than 0.5% gives you the same size of the 3D model on your computer.


    Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standards ISO 10993. 


    Models has long-term stability under 100°. Also has short-term stability up to 180°C and can be used for films thermosettling.

Finishing Instructions

  1. Agitate in a vat with TEK1960* solvent for 1-2 minutes to remove excess resin.

  2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

  3. Clean off any excess of liquid with a cold blowdryer or compressed air.

  4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

Safety notice

The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.


 More Information                     MSDS

Additional information

Weight 1.5 kg
Dimensions 10 × 10 × 30 cm

1 KG, 0,5 KG


Beige, Bone


There are no reviews yet.

Be the first to review “Harz Labs Dental Model Beige / Bone 3D Printing Resin”

Your email address will not be published. Required fields are marked *

Slide to unlock *

This site uses Akismet to reduce spam. Learn how your comment data is processed.