Harz Labs Industrial Rigid Clear 3D Printing Resin


Designed with increased resistance to aggressive environments, high hardness and bending strength, allows you to print models and prototypes. Clear color.



3D printing resin Harz Labs Industrial Rigid Clear has high hardness and bending strength. It has increased resistance to aggressive environments. Allows you to print functional models, such as fittings, adapters, parts of washing equipment, as well as rigid prototypes. The weakly expressed smell and the absence of volatile monomers allows the material to be used even in small workshops.


Russian certification. Product without european certification, to be used only for models.



3D printing settings on most widespread 3D printers

click here


3D printing resin Harz Labs Industrial Rigid Clear characteristics



 Color   Transparent
 Elongation at break   17 ± 3 %
 Hardness (Shore D)   86 ± 3
 Odor   Weak odor
 Bending strength   138 ± 10 MPa
 Elastic modulus   2500 ± 300 MPa
 Viscosity according to Brookfield at 25°C 75 ± 5 MPa
Tensile strength   2500 ± 300 MPa


Finishing Instructions


  1. To clean and remove excess resin, flash the 3D printed part for 30 seconds, several times until excess resin is removed, in an ultrasonic cleaner with TEK1960* .

  2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

  3. Clean off any excess of liquid with a cold blowdryer or compressed air.

  4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.


Safety notice


The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.                    

Additional information

Weight 1.5 kg
Dimensions 10 × 10 × 30 cm

0,5 KG




There are no reviews yet.

Be the first to review “Harz Labs Industrial Rigid Clear 3D Printing Resin”

Your email address will not be published. Required fields are marked *

Slide to unlock *

This site uses Akismet to reduce spam. Learn how your comment data is processed.