Description
3D printing resin Harz Labs Dental Denture Base has low shrinkage, as well as a combination of high Shore D hardness and flexural strength, making it possible to produce dentures with a long service life and wear resistance. Printed dentures are highly polished and can be customized using composite stains. A slight odor and the absence of harmful monomers allow you to work even in a small room.
Russian certification. Product without european certification, to be used only for models.
COMPATIBLE WITH MAIN DLP/LCD 3D PRINTERS
3D printing settings on most widespread 3D printers
3D printing resin Harz Labs Dental Denture Base characteristics
Appearance | Opaque liquid | |
Color | Pink | |
Elongation at break | 9 ± 2.5% | |
Hardness (Shore D) | 90 ± 3 | |
Odor | Weak odor | |
Bending strength | 135.0 ± 5.0 MPa | |
Elastic modulus | 2500 ± 150 MPa |
Finishing Instructions
-
To clean and remove excess resin, flash the 3D printed part for 30 seconds, several times until excess resin is removed, in an ultrasonic cleaner with TEK1960* .
-
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
-
Clean off any excess of liquid with a cold blowdryer or compressed air.
-
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
Safety notice
The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer’s instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.
Reviews
There are no reviews yet.